Figurines Add Life to Your Modeling

by Bob Law

Fig2-Ice-Cream_Stand.JPG

Who amongst us does not enjoy people watching? When you drive down a street, isn’t your eye immediately attracted to peoples’ activities? Utilizing figurines in your models can cause the casual viewer of your models to focus their attention not only on the human activity but also upon the buildings and scenery you have constructed.

I have had more opportunity lately to visit quite a few layouts. I am struck that very few modelers make much use of figurines. A very elaborate and well-constructed street scene will often be devoid of people making the scene seem abandoned. The addition of just a few figures can quickly make the same scene seem occupied and lively. Most of all it will draw the viewer’s eye into the details of other buildings to search out for more such human activity. 

A visitor to my recent open house commented on all the figurines I use on my layout. He wondered how I was able to use them in such different ways and most of all, how I didn’t have a vast surplus of little people since he could often only find use for one or two figures out of a set of five or six.

Figurines come in packets assuming that the set should be used to create a scene as provided in the packet. I have found that many of these prearranged scenes are often unusable because the scenes are often not the sort of thing that would be found along a railway or the figurines themselves are in poses that are not really useful or visually credible. By making a study of the various figurines available from all the manufactures I have come upon ways of combining different figurines from different sets to create new and more realistic human activity scenes.  This requires creativity and thought but the results can be as rewarding as building any model.

Fig1-Mr_Beer.jpg

Perhaps my most favorite scene on my layout is one I call “Mr. Beer gets a bath.” (left) It is actually based upon a personal experience I had with a next-door neighbor years ago. We had labored hard to restore an old house and yard only to have a family move in next door that collect all sorts of junk cars and trash all around their house. I would have liked to have dumped a bucket of dirty water on my neighbor’s head but never did – alas. 

In the Woodland Scenics set “Full Figured Folks” there was a fat guy with a beer who much reminded me of my old neighbor. In a Preiser set there was a young woman holding a bucket about to dump the water from a set called “Cleaning the House.”  This figurine is now available as a solo figure.  From this, the scene began to build in my mind. I obtained Woodland Scenics sets “Children” and “Dogs & Cats.” I also ordered Preiser’s “Women Hanging Laundry.” Of course, I also had to collect together all sorts of junk much of which came from my scrap box plus stuff found in the detailing section of the Walters reference book and a truck from Jordan Highway Miniatures. I assembled this altogether into the scene. It was great fun.

I used most of the figures purchased in the scene. Yet I had all the rest of the full-figured people unused with no apparent place to put them. Then it occurred to me that the most probable place for chubby people to be would be at an ice cream stand. (previous page, top) Yet I wanted to create some comedy to that scene. I perused the available possibilities and came upon a Preiser set called “Children” with a boy searching for pocket change. This kid would be holding up a line of people searching for the nickel he doesn’t have. Finding uses for the rest of the figures in the “Children” was easy. I used up a many figures I had left over from the “Mr. Beer” scene along with others.   

Fig3-Paradise_Burlesque.JPGSoon using up leftover figures became a challenge in itself that I came to enjoy. The scene I call “Photo at the Burlesque”(above) is composed entirely of left-over figures from various sets some of which I no longer can remember. The photographer is available from Preiser as a single figurine. The scene is inspired by something that I read about occurring during the heart of the Depression. Business was so poor that even the Burlesque houses couldn’t attract customers and had to resort to advertising (something they rarely had to do.) It was also inspired by a Depression Era song; “Lulu’s Back in Town.” Here a photographer is taking a picture of the ever-popular Lulu while the Mob and bribed police protect her. A pretty girl in front of a racy car always attracts attention in the newspaper.

Fig4-Utility_Worker.JPGFinding use for left over figures doesn’t have to be as elaborate as this. For instance, I was left with one figure from a Preiser “Truckers” set; a guy with both hands raised to open a roller door on a truck. I had no such truck. So instead he became a utility worker replacing a transformer (below) on a utility pole.

The possibilities are endless to create all sorts of interesting mini-scenes once you get into this as a creative challenge.

But take care. People may look at you askance and worry if you talk too much about the “little people.”

Convention Report

 

SMDMINI
Bob Morningstar

By Bob Morningstar, MER Director

The 2019 Mid-Eastern Region “Liberty Bell” convention was held October 10-13 at the Valley Forge Crowne Plaza in King of Prussia, PA. I attended all 4 days and was really pleased with the experience. The hotel and hotel staff were excellent, the Convention committee did a great job of venue selection and negotiating a very reasonable room rate. The Convention Committee chair reported that there were 236 registered attendees.

The arrival and badging process was painless and took all of 2 minutes on Thursday. The “White Elephant” sale was well stocked with goodies to buy. I took up 15 items to sell, came home with only 5 items and I was $62 to the good when I checked out on Sunday morning.

Thursday night was the quarterly MER board meeting, items of significance included:

  • The MER newsletter editor has stepped down and the region is looking for a new editor, any takers?  Tom?
  • There was a discussion of having a full audit of the regions financials The expense is prohibitive and the board is working toward getting a financial review completed which serves the purpose of an audit but can be done by volunteers versus paying for a CPA. Not to worry as it appears we are in good financial shape and the MER treasurer is very conscientious.
  • The executive committee chairperson provided an update on the convention attendance and there was discussion about the competing RPM events taking away both presenters and clinicians from the NMRA conventions.

Friday morning there was a regional editor’s breakfast, for those involved in producing the divisional reports and the region report. Part of my duties as a director will be to oversee the production of the eLocal, so the opportunity to hear the various editors describe their processes and challenges was informative and useful. There was a interesting discussion about copyright and the importance that the editors ensure that any content (including photos and diagrams) be produced by the author or if from someone else that there is a written paper trail of permission to use. The main takeaway was that all the editors could use more content from the membership. Producing content for our Wheel Report provides an opportunity to share your modeling activities and is another avenue to learn from others. One division actually produces paper copies of the newsletter and places them in area hobby shops to increase the awareness of their division and the NMRA.   Perhaps something for us to consider?

The clinics were well done, the audio visual equipment worked, and the Philly division staff excelled in ensuring that someone on the convention staff was at each clinic to introduce each speaker, assist with the computer and projector, and present a certificate to the presenter at the end of the clinic (This was a great idea and I hope future convention planners do the same.).

My contest entry this year was the Western Maryland Cement Hopper clean out facility that was located on my layout. It took 2 hours to gently remove it from the layout and place it on a piece of homasote for display purposes. I entered it in the online display category and earned 3rd place with 79 points. I intend on taking the judges comments and revising the model for a later submission, hopefully to get to the 87 points necessary for a merit award.  Close but not close enough. The judges comments were encouraging and fair. A bit more attention to detail is what it needs.

I admit I am a clinic junkie and attended them from 8 AM until well into the evening (getting my monies worth). There were some very interesting clinics on 3D printing, another hobby of mine, and a fascinating clinic on poultry cars and poultry transport in the late 19th and early 20th century. Who knew that live chickens traveled by rail?  I didn’t.

Saturday was spent in clinics from morning until dinner, except for an informal meeting with a couple Master Model Railroaders and David Chance, MER AP manager.

They answered many of my questions and encouraged me to pursue the MMR.

I did not attend the banquet as I had plans to meet with old classmates from college that evening. The last day, Sunday, wrapped up with clinics in the morning and the annual MER business meeting. Twenty five or so members attended and yours truly was installed as a new Director at the very end.  

Overall it was worth my investment. I enjoyed a few days of total immersion in the hobby that I love. The new friends I made were priceless.   Next year’s convention is in Charlotte, NC. I have already marked off for it at work and encourage all to attend.

Waynesboro Lion’s Train Show

Show:  November 3, 2019.

Time:  9 AM to 2 PM.

Address:  517 South Main St, Mont Alto, PA 17237.

Web:  https://www.facebook.com/events/332600907687145/

  • Over 100 vendor tables
  • (N. HO, S, O scales)
  • Working model railroad
  • Door prizes
  • Food and refreshments
  • Lions Club Brooms for sale
  • Multi-gauge test track

Admission:

  • $5.00 per person
  • $8.00 per family

Table Rentals:

  • $12.00 to rent first table
  • $10.00 for each add’l table

For more information or to reserve a table, please contact: